Plese Check Photo and Discription. Please feel free to message me if you have any concerns. We provide valid Tracking Numbers for all orders. Exchabge possible within 30 days. I changed my mind, it’s not what I thought. If you have any concerns, please feel free to message me.
Iron Square Tsuba Kobuse Clay Tempered Folded T10 Japanese Katana Handmade Sword. Handle: 26 cm/10.24′. Widdth: 3.2 cm/1.26′. Thickness: 0.7cm/0.28′. Blood groove: No bohi. Fittings: Square iron tsuba + Genuine shark rayskin +Brass habaki&seppa+Alloy fittings. Blade: Hand forged, Kobuse, folded 15 times(32768 layers), clay tempered, quenching, hand-polishing, etc. The vast majority of modern katana and wakizashi are the maru type which is the most basic, with the entire sword being composed of a single steel. The kobuse type is made using two steels, which are called hagane (edge steel) and shingane (core steel). Steel of different materials is forged and welded together to hammer the basic shape of the sword. This allows the overall blade to have a higher toughness and absorb a lot of impact. Reducing the possibility of breaking or bending to some extent. Makes the blade not only has high hardness, but also has super toughness. In the forging process, the most useful process is the folding, where the metals are forge welded, folded, and welded again, as many as 24 times(15 is the best). The folding removes impurities and helps even out the carbon content, while the alternating layers combine hardness with ductility to greatly enhance the toughness. The less impurities, the harder and sharper the blade will be. We have done cutting tests on the blades. It can cut bamboo(young bamboo tree), grass mattings and slice paper(The blade should be tilted at 45 degrees). To maximize both the cutting edge and the resilience of the sword spine, a technique of differential heat-treatment is used. The sword is painted with layers of clay before heating, providing a thin layer or none at all on the edge of the sword, ensuring quick cooling to maximize the hardening for the edge. A thicker layer of clay is applied to the rest of the blade, causing slower cooling. This creates softer, more resilient steel, allowing the blade to absorb shock without breaking. International Buyers – Please Note. Please contact with us before you leave feedback. We will try our best to solve the problem for you, thank you. Sometimes, you may not get our reply immediately due to the time difference among each country. However, please be assured that we’ll strive to reply you as soon as possible once we got your messages.
Thank you for viewing my listing. There are scratches, dirt rust. Japanese katana guard. Design : Shippou Kyo-Sukashi -?? International Buyers – Please Note. These charges are usually levied by the delivering carrier or. When you collect the item. Please note that this is not to be confused with additional. We do not list items below value and mark items as’gifts. US and international government regulations prohibit. Thank you for your understanding.
Japanese antique Tsuba of Katana swords. Please check the photos carefully before purchasing. This item is an antique and has scratches, rusts, and dirt due to aging.
M802 Tsuba Japan Sword Art Japanese Openwork Brim Iron Base Unsigned Late Murom. Thank you for taking a look at the item we are listing. This item is a used item. It would be great if you could take a look at that as well. We will do our best to find the item you want. In the event of any delays, rest assured that we will investigate and take responsibility. Thanks for taking a look at my products. We hope you will consider them. I have only slight feedback. It may be making you uncomfortable. But don’t worry. I will provide courteous and responsive service. We also have a variety of other products for sale. We hope you will take a look at those as well. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you. All of the products we sell are cleaned and disinfected during inspection. We hope you will consider purchasing our products. There is an inquiry button at the top. Please understand them before purchasing the product. Please refer to the following for more information. We will respond to your inquiry within 24 hours. Our working hours are from 10:00 to 20:00 Japan time. Once you have received your item, please make feedback for us as this will let us know that you have received your item. In case of damage, please be sure to take pictures of the following items and send them to us 1. Photograph of the entire item 2. Photograph of the damaged part 3. A photo of the condition of the cushioning material in the package 4. A photo of the condition of the cardboard box it arrived in. This can be changed for an additional charge. Estimated arrival time in Economy Asia: 2 to 3 weeks Oceania: 2 weeks North America: 2-3 weeks Middle East: 2-3 weeks Europe: 2-3 weeks It may take longer than the estimated arrival date due to carrier and traffic conditions in each region. Subject to change on a daily basis. Please take a good look at the pictures listed and be sure to review our sales policy before purchasing. Also, the product must be in its original condition, including box, packaging, and all accessories. Please check the images for details. There may be scratches or deterioration that cannot be seen in the pictures. There may be a slight smell attached to the product. Please understand these items before purchasing. About items for sale such as clothes, shoes, and accessories There may be listings with no size information at the time of sale. The sizes listed may be Japanese sizes. Regarding electrical appliances and other items for sale We sell electrical appliances that operate on Japanese voltage. Please convert the voltage to that of the country in which you will be using the product before using it. Using a transformer will solve this problem. About the sale of serial codes, etc. We will send you a piece of paper that actually contains the serial code.
Kill Bill Samurai Katana Japanese Sword Manganese steel Iron Tsuba Hamon Sharp. Item number: LQ1612A02 Tsuba & Menuki: Iron&alloy. Overall Length: 40.6 inch /103 cm Habaki: Brass. Blade Length: 27.5 inch / 70 cm Seppa: Top grade brass. Handle Length: 10.24 inch / 26cm ItoBlack real leather. Blade Width: 1.26 inch / 3.2cm Rayskin: Red real rayskin. Blade Thickness: 0.28inch / 0.7cm Bo-hi: Yes. Blade material: Manganese steel Tang: Full tang. Sageo: black and white silk Saya. The carbon steel with this blade is also called T10 here. The blade has been polished with 10 procedures with ancient method. TSUBA(plate): Iron, The tsuba is used to protect your hand from sliding onto the blade during thrusts. HABAKI(blade collar):is a one piece brass construction, there is engraving on the habaki of this sword. The main point of the habaki is to make the saya tight to the blade, so it is normal if there is scratch on. SEPPAS(spacer):Two Seppas secure the Tsuba if the tsuba is not so tight after a long time, you can disassemble the sword and put more seppas there. HANDLE: Wide on the 2 ends, thin in the middle; Hardwood wrapped with blue silk ito. Fuchi&Kashira on the 2 ends of the handle. SAGEO: Used to tie the sword on your waist as a belt in the old time, but now we usually tie on the saya as in the picture. SAYA(scabbard): The saya (sheath) of the sword is made of hardwood. Tied with Sageo on the Kurigaga (knob) of the scabbard. This sword has bo-hi. While it is common to find swords which have a rat tail tang (two pieces welded together), a thin tang or even no tang at all, all of our Japanese swords have a thick tang running from the blade to the full length of the handle. DESIGN YOUR UNIQUE SWORD. Only after we confirm, can the changes be done. Ito & Sageo Cord. International Buyers – Please Note. Please contact with us before you leave feedback. We will try our best to solve the problem for you, thank you. Sometimes, you may not get our reply immediately due to the time difference among each country. However, please be assured that we’ll strive to reply you as soon as possible once we got your messages.
Plese Check and Discription. Thank you for viewing. The openwork sword guard with two beards on iron ground Dimensions: Height approx. 8 cm, width approx. 7.9 cm, weight 100 g The ears are finished with Dote-mimi. The ears are finished with Dote-mimi (handmade ear). Although there is rust and decay, it has the feel of its age and familiarity from its age. The dimensions were measured with a tape measure, so please allow for slight deviations. The item may have some scuffs and scratches from age, but there are no visible flaws. What is wrought iron (roto-iron)? Wrought iron, or roto-iron in English, is a metalworking technique. It has been used for building structures in Europe and other countries since ancient times. We provide valid Tracking Numbers for all orders. Exchabge possible within 30 days.
Japanese sword samurai katana damascus folded steel iron tsuba brass fittings. The blade of this katana is made of carbon steel. It was folded forged by 11 times. It can be used in battle or for display. We would highly recommend it as a gift. Anyone would be thrilled to receive a gorgeous katana sword as a gift! This katana can be taken apart fully for maintenance purposes. You can disassemble the sword by taking out the pegs from the handle. GENERAL DATA OVERALL LENGTH: 103 cm / 40.5 inch BLADE LENGTH: 70 cm / 27.6 inch TSUKA LENGTH: 26 cm / 10.24 inch BLADE WIDTH: 3.2 cm / 1.26 inch BLADE THICKNESS: 0.7 cm / 0.28 BLADE HRC: 55 BLADE CRAFT: fully hand forged, water quenching BLADE MATERIAL: carbon steel, folded forged by 11 times (2048 layers). BLADE SHAPE: Shinogidukuri NAKAGO: full tang KISSAKI: medium (chukissaki) SHARPNESS:???? MIRROR EFFECT:?? MOUNTINGS TSUKA(HANDLE): hard wood core. Maki MEKUGI: 2 bamboo pegs TSUKA-ITO: black synthetic silk wrapping cord SAMEGAWA: genuine white rayskin FUCHI / KASHIRA / MENUKI: brass TSUBA(HAND GUARD): iron HABAKi & SEPPA: brass SAYA: glossy black lacquer with silvery pattern wooden scabbard with black specialized sageo. PACKAGE 1 sword with saya. No display stand or other fittings along with. This means that the carbon steel is folded by 11 times to produce 2048 layers. The higher quantity of layers provides more unique and mystical hada patterns, which defines and displays the craftsman’s experience and knowledge of traditional metallurgy passed down from generation to generation. Only the utmost skilled bladesmiths (Toushyo) and polishers (Togi-shi) can bring out the beauty and life from the Shinsakuto live blade. During the forging process, all of the slags and impurities of the steel are burned off and folded forged to an uncompromised strength with an sharp cutting edge. The final carbon content is 1% and the hardness is an impressive HRC 55°on the Rockwell Scale. This high quality blade can easily cut through tatami straw mats or bamboo for Tameshigiri or Batto-do use. If you don’t like the original mountings, you can choose the favorite ones from the options. Handle wrapping cord and saya cord should be the same color. If you only want to change one of them to another color, please inform of it specially. We can engrave English words, Chinese Characters on the blade for free. We can add or remove the machine-made wavy hamon for free. Usually thought be used for bloodletting only. It is also used to lighten the weight of the sword. We can add or remove Bo-hi for free. Most of our blades are sharp. We can also make the blade unsharpened for free if you require. The price varies from different swords. International Buyers – Please Note. Please contact with us before you leave feedback. We will try our best to solve the problem for you, thank you. Sometimes, you may not get our reply immediately due to the time difference among each country. However, please be assured that we’ll strive to reply you as soon as possible once we got your messages.
